Westinghouse WP2700 Owner's Manual download pdf (Page 9)

SAFETY

WARNING

• NEVER modify spray equipment.

• ALWAYS wear protective clothing to

protect eyes and skin from contact

with sprayed materials.

NEVER aim spray in the direction of

power source. Contact with power

source can cause electric shock or

burn.

Unexpected kickback while spraying

can cause you to fall.

• Use of pressure washer can create

slippery surfaces and puddles. The

operating area of this equipment

should have adequate drainage to

reduce the possibility of a fall due to

slippery surfaces.

• Be extremely careful if necessary

to use the pressure washer from

a ladder, scaffolding or any other

similar location.

• Use both hands to ﬁ rmly gasp the

spray gun while in use to avoid injury

from high-pressure kickback.

NEVER use acids, toxic or corrosive

chemicals, poisons, insecticides, or

any kind of ﬂ ammable solvent with

this equipment. Only use detergents,

cleaners and degreasers recommended

for use in this pressure washer.

ALWAYS wear chemical splash safety

goggles that comply with ANSI Z87.1

when operating or in the vicinity of this

equipment.

ALWAYS remove any tools or other

service equipment used during

maintenance from the pressure washer

before operating.

NOTICE

NEVER operate pressure washer with damaged or

missing parts.

NEVER modify any feature or component of pressure

washer.

NEVER spray at glass when using the high-pressure

nozzle (red). High-pressure spray may damage fragile

items including glass.

DO NOT exceed rated pressure when operating

pressure washer.

NEVER move pressure washer by pulling on any

hoses. Always use handle to move pressure washer.

Check components for ice forming on components

when operating in cold weather.

Remove the protective shipping caps from the pump’s

water inlet and outlet.

Be sure the water supply is connected and turned

on before starting the engine. Damage to the pump

could occur and will void the warranty.

Water supply must deliver a minimum of 3.8 gal

(14.3 L) per minute and at least 30 psi (2 bar). Do

not siphon standing water for the water supply. Water

temperature must not exceed 100°F (37.7°C).

DO NOT install a one-way valve, vacuum breaker or

check valve at the pump’s water inlet. Installing one of

these devices at the pump’s water inlet could cause

damage to the pump and will void the warranty. Allow

at least 10 feet (3 m) of unrestricted hose length

between the pump’s water inlet and a one-way valve,

vacuum breaker or check valve.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 93 94

Comments to this Manuals

No comments

Westinghouse WP2700 Owner's Manual Page 9

Comments to this Manuals

Related products and manuals for High-pressure cleaners Westinghouse WP2700