66Unpack and inspect fan carefully to be certain all contents are included. Turn off power at fuse box to avoid possible electrical shock.1Use metal o
15LIGHT FIXTURE INSTALLATION INSTALACIÓN DEL ARTEFACTO LUMINOSO18 19Install the mounting ring (1) onto the motor housing by using the screws (2) provi
16Connect the 9 pin connector from the light kit (2) to the 9 pin connector from the motor (3). Push the connections neatly into the mounting ring (1)
1722 23 24Install 2 x 40W type B bulbs (included).Instale 2 bombillas tipo B (incluido) de 40 W.Locate the indentations on the neck of the glass (2) a
18 ETL-ES-Harmony-WH11
7Revise el motor por si tiene lengüetas estabilizadoras para el embalaje y retírelas si las tuviera. Quite el pasador de fijación (1) desde
86MOUNTING OPTIONSOPCIONES DE MONTAJEChoose a MOUNTING OPTIONElija una OPCIÓN DE MONTAJENORMAL DOWNROD OPTIONIf installing downrod supplied with fan,
9Insert downrod (2) into downrod coupling (5). Make sure to align hole in downrod with the hole in downrod coupling. Install cross pin (1) through cou
109Loosen downrod ball (1) from downrod (3) by removing set screw (2). Slide downrod ball (1) off of downrod and remove pin (4).Quite el tornillo de a
11BLADE INSTALLATIONINSTALACIÓN DE LAS PALETAS11 12Install the blade (2) to the short blade bracket (3), as shown, with blade screws (1)provided in th
12MOUNTINGMONTAJE14With bracket holding fan assembly, make electrical connections using the following step for wiring instructions.Con la pieza de mon
1313WIRING OPTIONSOPCIÓN DE CABLEADO16Follow diagram above to make wiring connections for wall control operation.15Follow diagram above to make wiring
14Align the keyholes on the canopy (3) with the protruding screw heads (2) from the mounting bracket (1). Lift the canopy up and rotate clockwise unti
Comments to this Manuals