Westinghouse WFM1810WC User Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 14
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
9
PROBLEM POSSIBLE CAUSE SOLUTION
Appliance does not work
Appliance is not switched on. Switch on the appliance.
Mains plug is not plugged in or is loose. Insert mains plug.
Household fuse has blown or is defective. Check fuse, replace if necessary.
Socket is defective. Mains malfunctions are to be corrected by
an electrician.
Appliance cools too much. Temperature is set too cold. Turn the temperature regulator to
a warmer setting temporarily.
The food is too warm. Temperature is not properly adjusted. 
Door was open for an extended period. 
A large quantity of warm food was placed in the
appliance within the last 24 hours.
Turn the temperature regulation to a colder
setting temporarily.
The appliance is near a heat source. 
Heavy build-up of
frost, possibly also on
the door seal.
Door seal is not air-tight (possibly after reversing
the door).
Carefully warm the leaking sections of the door
seal with a hair dryer (on a cool setting.
At the same time shape the warmed door seal by
hand so that it sits correctly.
Unusual noises. Appliance is not level. Re-adjust the feet.
The appliance is touching the wall or
other objects.
Move the appliance slightly.
A component, e.g. a pipe, on the rear of the
appliance is touching another part of the
appliance or the wall.
If necessary, carefully bend the component out of
the way.
The compressor does
not start immediately
after changing the
temperature setting.
This is normal, no error has occurred. The compressor starts after a period of time.
Water on the floor or
storage shelves.
Water drain hole is blocked. 
TROUBLE SHOOTING
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments