Westinghouse WSU6603XR User Manual download pdf (Page 11)

SETTING AND STARTING A WASHING PROGRAM

STARTING THE WASHING PROGRAM

WITHOUT DELAY START

1. Close the appliance door.

2. Switch on the appliance. Make sure that

the appliance is in setting mode.

3. Set a washing program. Refer to 'Wash-

ing programs'.

• The related program indicator comes

on.

• All other program indicators go off.

• The time of the program flashes in the

display.

• The START indicator flashes.

4. Press the START button. The washing

program starts.

• The time of the program is no longer

flashing in the display.

• The START indicator is no longer

flashing.

STARTING THE WASHING PROGRAM

WITH DELAY START

1. Close the appliance door.

2. Switch on the appliance. Make sure that

the appliance is in setting mode.

3. Set a washing program.

4. Press the DELAY button repeatedly until

the display shows the time you want to

set for the delay start.

• The time of the delay start flashes in

the display.

5. Press the START button. The count-

down starts.

When the countdown is completed, the

washing program starts automatically.

The opening of the appliance door in-

terrupts the countdown. When you

close the door, the countdown contin-

ues from the point of interruption.

CANCELLING THE DELAY START

If you have not yet pressed the START

button

1. Press the DELAY button repeatedly until

the display shows the time of the wash-

ing program.

2. Press the START button, the washing

program starts.

If the START button has been pressed

and the countdown operates

•Press the DELAY button repeatedly until

the display shows the time of the wash-

ing program. After a few seconds the

washing program starts automatically.

Warning! Only interrupt or cancel a

washing program if necessary.

Attention! Open the door carefully.

Hot steam and water can escape.

INTERRUPTING A WASHING

PROGRAM

• Open the appliance door. The washing

program stops.

• Close the appliance door. The washing

program continues from the point of in-

terruption.

CANCELLING THE WASHING

PROGRAM

If you have not yet pressed the START but-

ton, you can change the setting.

To change the setting while the washing

program operates, it is necessary to cancel

the program.

• Press and hold the PROGRAM button

and the DELAY button at the same time

until all the program indicators come on.

Make sure that there is detergent in the

detergent dispenser before you start a

new washing program.

END OF THE WASHING PROGRAM

When the washing program is completed,

the display shows 0.

1. Switch off the appliance.

2. Open the appliance door.

For better drying results, keep the ap-

pliance door ajar for some minutes.

REMOVING THE LOAD

• Let the dishes cool down before you re-

move them from the appliance. Hot

dishes are easily damaged.

• First remove items from the lower basket,

then from the upper basket.

westinghouse 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Comments to this Manuals

No comments