Westinghouse 7869100 Installation Guide

6ETL-ES-Arcadia-WH10Unpack and inspect fan carefully to be certain all contents are included. Turn off power at fuse box to avoid possible electrical

15ETL-ES-Arcadia-WH1018To install the canopy cover ring, peel the backing off the adhesive tape strips on the inside of the cover ring. Slide the cove

16ETL-ES-Arcadia-WH10Make sure the screw hole protrusions on the blade brackets and holes on the flywheel are aligned.Asegúrese de que las protuberanc

17ETL-ES-Arcadia-WH10Screw the Allen screws (provided in the hardware bag) into the screw holes and hand tighten. Use the Allen Key (Wrench) provided

18ETL-ES-Arcadia-WH10LIGHT FIXTURE INSTALLATION INSTALACIÓN DEL ARTEFACTO LUMINOSOAttach the light kit plate (2) to the light kit plate support (1) by

19ETL-ES-Arcadia-WH1024Remove one of the screws on the light kit plate (1), and loosen, (do not remove) the other two.Quite uno de los tornillos de la

20ETL-ES-Arcadia-WH10LIGHT FIXTURE INSTALLATION INSTALACIÓN DEL ARTEFACTO LUMINOSOAttach the light kit (2) to the light kit plate (1) by placing the k

21ETL-ES-Arcadia-WH1027 281234Install light bulbs (included).Instale las bombillas de luz (incluidas). Lift the glass (2) up placing it flush onto the

22ETL-ES-Arcadia-WH1029Mount wall bracket to the wall using screws provided. Place the transmitter into the mounted holder.Instale el soporte de pared

23ETL-ES-Arcadia-WH10Remote Control Operation1. Fan Control– press and release. The remote control operates the fan speed as follows: 1 - high; 2 -

7ETL-ES-Arcadia-WH10MOUNTING BRACKET INSTALLATIONINSTALACIÓN CON SOPORTE DE MONTAJEInstale el soporte de montaje (1) a la caja eléctrica del techo usa

8ETL-ES-Arcadia-WH10  FLUSH MOUNT OPTIONOPCIÓN DE INSTALACIÓN AL RAS5 6Guide motor wires through the base of the canopy as shown, an

9ETL-ES-Arcadia-WH10NORMAL DOWNROD OPTIONOPCIÓN CON VARILLA VERTICAL PARA CIELORRASO NORMAL8Place downrod assembly (4) into canopy (1), canopy cover r

10ETL-ES-Arcadia-WH1010Loosen downrod ball (1) from downrod (2) by removing set screw (3).Afloje la esfera de la varilla vertical (1) de la varilla ve

11ETL-ES-Arcadia-WH10EXTENDED DOWNROD OPTIONOPCIÓN CON VARILLA VERTICAL MÁS LARGA11Slide downrod ball (1) off of downrod and remove pin (2). Deslice l

12ETL-ES-Arcadia-WH10Make wiring connections from the house and the fan to the remote receiver (2) as shown. Connect using wire nuts (1) (provided). M

13ETL-ES-Arcadia-WH10This remote control unit is equipped with 16 code combinations to prevent possible interference from or to other remote units. Th

14ETL-ES-Arcadia-WH10SECURE TO CEILINGASEGURE EL VENTILADOR AL CIELORRASO17For flush mount fans, carefully lift fan from the mounting bracket, making