Westinghouse PSL632W User Manual download pdf (Page 22)

This appliance must be installed by an authorised person, according to all codes and

regulations of:

• Electrical supply authorities.

• Building regulations

• Local government and council authorities.

• AS5601/AG601 (particular attention to 5.12.1 and figure 5.1 on page 90, 5.12.1.7).

• AS/NZS 3000 (particular attention to clause 4.3.11 and clause 3.9).

Model No 632 all electric cooker, fixed wired

• Ensure the anti-tilt brackets have be correctly installed (see page 21).

• Check that cabinets and electrical connection are suitable (see pages 20 & 23).

• Remove access panel to gain access to mains connection terminals.

• Fix wire using suitable cable in accordance with ASINZS 3000, through the fixed wiring

hole, allowing enough length to remove the cooker for maintenance and service.

• Protect wiring against mechanical failure. Refer to AS/NZS 3000 Cause 3.9.

• For New Zealand Only: The cooking range must be connected to the supply by a

supply cord fitted with the appropriately rated plug that is compatible with the socket-

outlet fitted to the final sub-circuit in the fixed wiring that is intended to supply this

cooking range.

CONNECTING TO SERVICES AND COMMISSIONING

ACCESS PANEL

FIXED WIRING HOLE

ANTI-TILT BRACKET

TERMINAL BLOCK

HARDWIRED CONNECTION

MODEL 632

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

No comments

Westinghouse PSL632W User Manual Page 22